Fandom

RC Wiki

Advanced RC Foam Electric Model Airplane Kit & ARF

258pages on
this wiki
Add New Page
Talk0 Share

Write the text of your article here!

Any small scale representation of a full size airplane is considered to be a model airplane. A number of different varieties of model airplane exist for many different purposes: some are simple plastic models made to be showcased on home mantelpieces, while others are gas or battery powered versions that can actually fly. Today we talk about those are battery powered versions which can fly via remote control.


The yellow Piper J-3 Cub, Dynam A-10 Thunderbolt II, T-28 Trojan and Meteor 70MM EDF are the aviation's genuine classics.

I. Piper J-3 Cub (1200mm)

There was a time when the general public thought that every airplane flying was either a DC-3 or a Piper Cub. More than 20,000 Cubs were built between 1937 - 1947, and for years after that it was the most commonly seen airplane at airports all over the country. Forgiving flight characteristics, light wing loading, and hands-off stability made it perfect for America's weekend pilots. The Cub design is ideal for R/C flying and makes an excellent first-time project.

[1]

Wingspans: 1200mm (47in)
Overall Lengths: 1010mm (40in)
Wing loading: 40.5g/dm2
Flying weight: 1150g (40.6oz)
Servos: 9gX4
ESC: 30A
Motor: KV850 Brushless Outrunner
Materials: EPO

II. Dynam A-10 Thunderbolt II (1080mm)

The Dynam A-10 Thunderbolt II also known as the Warthog is an American single-seat, twin-engine, straight-wing jet aircraft designed to provide close air support of ground forces. It was the first USAF aircraft designed exclusively for close air support. The Dynam A-10 has superb maneuverability even at low speeds and altitude; this is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two Electric Ducted Fan Motors and it comes 90% Ready to Fly. All Servos, receiver and other electronic are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is finished in the factory to a high standard and represents an excellent replica of the real aircraft.

[2]

III.T-28 Trojan (1270mm)

Wingspan: 1270mm
Fuselage Length: 1000mm
Wing loading: 50g/dm2
Flying weight: 1350g
Servo: 9gX4
ESC: 30A
Motor: KV850
Material: EPO
With Retract Landing Gear

[3]

IV. Meteor 70MM EDF (910mm)

Dynam Meteor is a High Speed 70mm EDF Sport Jet. The airplane is constructed by EPO and it is Pre-Painted from the factory. All servos, receiver, 70mm Fan and the ESC are Pre-Installed on the model. This airplane is designed for High-Speed flying with a powerful Brushless Electric Ducted-Fan. The Fan Unit is very well constructed for High-Performance flying. This model is absolutely one of the fastest EPO DF-Airplanes in the Market. The RTF version comes with 2.4GHZ radio, Receiver, 70mm Brushless EDF, 60A ECS, Servos, 4S 2600 Li-Po and Li-Po charger. The PnP version comes include everything you need to fly the model Except Transmitter and Receiver. The Building time is around 45 min

[4]

These RC Foam electric airplane are constructed by EPO, EPO is durable, flexible, lightweight, and adhesive-friendly foam.The EPO foam is a great all-around performer for your airplane.

[5]

There are more classical models such as cessna 182,cessna 550,pitts model,skybus,sitfire,extra 330,p51 mustang... you can check all of them on sdshobby.net. No matter you want to buy the kit or ARF model, color in blue or red,left or Right Hand Throttle, SDSHobby all supply the best service and best price for you.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.