Fandom

RC Wiki

Octatron SkySeer

258pages on
this wiki
Add New Page
Talk0 Share
Skyseer-small

The Octatron SkySeer™ is an autonomous, computer controlled unmanned aerial vehicle (UAV) designed for easy transport and launch. It is designed and manufactured by Octatron, Incorporated of St. Petersberg, Florida, USA.

Intended for short-range operations, the electric-powered SkySeer resembles a normal radio controlled model airplane or two-meter glider. Once unfolded from its storage tube and its electronics initialized, the SkySeer is then hand-launched by its operator. All of the drone's basic flight functions are handled by GPS including landings. Range is approximately two miles/3.2km and is extendable via Octatron's NetWeaver™ interface.

The basic platform is very low cost; a fully loaded SkySeer retails for approximately US$25,000 to $30,000 which includes all electronics, video surveillance equipment, ground station and computer interfaces. Video interface is in real time and allows the operator to literally see what the drone sees and to record it as such. The ground station's recorder can store up to twenty hours of high-quality MPEG-2 format video which can then be transfered to DVD or Flash.

The Los Angeles County Sheriff's Department is currently experimenting with the SkySeer as a means of crime prevention. At present, the experiment has been suspended by the Federal Aviation Administration because of that agency's claim of a lack of the proper permits. Although the FAA does not regulate model aircraft, it does have jurisdiction over unmanned aerial vehicles.

Negotiations between the two agencies are underway.

Airframe specificationsEdit

  • Wingspan: 6.5' (1.98m)
  • Weight: 3.125 lbs (1.42kg)
  • Endurance: 45 to 60 minutes at cruise speed of 23 mph (37km/h)

External links and referencesEdit

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.